Portable Pressure Washer

Power in your hands

Point, squeeze and direct a focused stream exactly where it matters. In high pressure mode the washer delivers a rated 1.5 MPa (about 218 PSI) to help lift road film, dust and dried mud from your vehicle's exterior and wheels. It is controlled power built for routine care: strong enough for everyday grime, and compact enough to guide around mirrors, door handles and wheel spokes with precision.

When the job calls for a lighter touch, switch to the wider fan spray for broader coverage, or turn to foam and let the included soap dispenser do the prep work.

Three modes. One twist.

Everything happens at the nozzle. Twist it to move between modes and keep your routine flowing, with no tips to swap and nothing to misplace.

High pressure. A concentrated stream for targeted cleaning, rated at 1.5 MPa with a flow of about 107 L/h (28 gal/h). Reach for it on wheels, tires and stubborn spots.

Fan spray. A wider pattern at 0.7 MPa and about 140 L/h (37 gal/h) for rinsing larger surfaces and washing away foam.

Foam. The gentlest pressure and the highest flow, 0.4 MPa at about 160 L/h (42 gal/h), for applying car wash solution from the soap dispenser.

Foam first, then rinse

A good wash starts with foam. Fill the 250 ml soap dispenser with car wash solution mixed to the strength on its label, attach it under the spray barrel, and twist the nozzle to foam. Work from the lower panels upward so the foam coats evenly, then give it the dwell time your solution recommends without letting it dry on the paint in direct sun.

Next, switch to fan spray and rinse from the roof down, letting the water carry the foam and loosened dirt off the car. Finish the wheels and tires with the high pressure stream, where brake dust and road grime tend to build up.

Scrub. Rinse. Refresh.

The same compact washer brings cordless convenience to your bathroom routine. Apply a surface safe bathroom cleaner and let it do its work, scrub away the buildup, then rinse. Switch between the focused stream and the wider fan spray to send water exactly where you need it, across tile walls, glass panels and the shower floor.

With a bucket of clean water beside you and no power cord to manage, it suits short, focused sessions: a quick, thorough rinse after the weekly scrub.

Use only where permitted by the product manual and surface manufacturer. Confirm indoor use suitability before use. Avoid outlets, fixtures, damaged grout and seals.

Less weight. More freedom.

At approximately 1.1 kg (2.4 lb), the washer is easy to hold, aim and reposition as you work. The compact body measures about 300 × 309 × 80 mm (11.8 × 12.2 × 3.1 in), and the contoured handle keeps your grip steady as you reach across a hood or down low to a rocker panel.

The 6 meter (19.7 ft) inlet hose gives you room to move around your vehicle while the washer draws water from your bucket. When you are finished, the washer, hose and soap dispenser pack neatly into a car trunk, onto a garage shelf or into the cupboard under the sink.

Considered down to the intake.

Small details keep the setup simple. The filter head on the end of the inlet hose is weighted, so it sinks to the bottom of the bucket and keeps drawing water instead of floating to the surface. It also filters the incoming water before it reaches the washer. A clip on the hose hooks over the rim of the bucket to hold everything in place while you move.

Planning tip: at the rated flow, a full charge moves roughly 27 to 40 liters (7 to 10.5 gallons) of water, so a 19 liter (5 gallon) bucket lasts about 7 to 11 minutes of spraying depending on the mode. Keep a second bucket of clean water nearby if you plan to use the whole charge.

Charge up. Clean up.

The built in 2,000 mAh lithium ion battery (21.6 Wh) delivers up to 15 minutes of cordless operation, and a four light indicator on the base shows how much charge remains. Recharge through the USB C port in approximately 2.5 hours with a compatible 9V/2A charger and USB C cable.

The charger and cable are sold separately, so check that yours supports 9V/2A output. Charging with a power adapter other than 9V/2A may take longer, and runtime varies with operating conditions.

Good to know

Keep the soap dispenser upright. Its vented design may allow liquid to leak if it is inverted or dropped. According to the supplied product guidance, any initial leakage should stop after approximately 30 to 60 seconds of operation as pressure equalizes.

Performance figures are rated specifications, and results vary with your water supply, spray mode and operating conditions. Follow the supplied manual for setup, surface compatibility and care, and keep the spray moving at a sensible distance from paint, trim and seals.